China China Manufacturer High Quality Gjzg50 Ball Spline Shaft differential drive shaft

Product Description

Merchandise Description

The spline is a sort of linear movement program. When spline motions alongside the precision floor Shaft by balls, the torque is transferred. The spline has compact composition. It can transfer the More than load and motive electricity. It has more time life span. At present the manufacturing unit manufacture 2 sorts of spline, namely convex spline and concave spline. Normally the convex spline can take bigger radial load and torque than concave spline.
 

Solution name Ball spline
Model GJZ,GJZA,GJF,GJH,GJZG,GJFG,
Dia 15mm-150mm
Materials Bearing Steel
Precision Course Typical/ Substantial/ Precise
Package deal Plastic bag, box, carton
MOQ 1pc

Ball kind:φ16-φ250
High pace , higher precision
Hefty load , prolonged existence
Versatile movement,lower vitality use
Large motion pace
Large load and lengthy support life
Applicationgs:semiconductor gear,tire equipment,monocrystalline silicon furnace,health care rehabilitation gear

Item Parameters

Construction

Scope of application

Semiconductor gear,tire equipment,monocrystalline silicon furnace,health-related rehabilitation products.

FFZ measurement

Code and sort Nominal axial dia.
d
Exterior dia.
D
Size of spline nut
Lone
Max. duration of shaft
L
Common rated torque Basic rated load
Dynamic torsion
N-m
Stationary torsion 
N-m
Dynamic load
C kN
Static load
C kN
GJZG16 / GJFG16 sixteen 31 fifty five hundred 32 30 7.5 fifteen.6
GJZG20 / GJFG20 20 35 sixty three 600 fifty five fifty five 10.1 24.7
GJZG25 / GJFG25 25 forty two 71 800 103 one hundred and five thirteen.7 thirty.one
GJZG30 / GJFG30 thirty forty eight eighty 1400 148 171 17.1 37.one
GJZG40 / GJFG40 40 64 one hundred 1500 375 415 32.1 70.2
GJZG50 / GJFG50 50 eighty a hundred twenty five 1500 760 840 49.4 104.9
GJZG60 / GJFG60 sixty 90 a hundred and forty 1500 1040 1220 sixty four.two 128.two
GJZG80 / GJFG80 80 one hundred twenty one hundred sixty 1700 1920 2310 87.three one hundred seventy.seven
GJZG100/ GJFG100 one hundred one hundred fifty a hundred ninety 1900 3571 3730 109.nine 222
GJZG120 / GJFG120 120 180 220 1900 4100 5200 176.five 347

 If you have any demands,pls come to feel totally free to speak to us and we will send out you our catalog for reference.

Major Merchandise

Organization Profile

Buyer Suggestions

FAQ

one. Why pick AZI China?
With far more than 60 years of creation expertise, good quality assurance,factory right value.

2. What is your main merchandise ? 
Our Main products are consist of ball screw,linear guide,arc linear information,ball spline and ball screw linear CZPT rail module.

three. How to Custom made-made (OEM/ODM)?
If you have a product drawing or a sample, you should ship to us, and we can custom-made the as your required. We will also provide our specialist advices of the products to make the design to be more recognized & improve the overall performance.

four. When can I get the quotation?
We usually quotation inside 24 several hours right after we get your inquiry. If you are really urgent to get the price tag,make sure you contact us or tell us in your email so that we will regard your inquiry priority.

5. How can I get a sample to check out the top quality?
We estimate according to your drawing, the value is suited, indication the sample listing.

sixWhats your payment conditions?
Our payment phrases is 30% deposit,equilibrium against obtaining copy of B/L or L/C sight.

Material: Gcr15
Load: Customized
Stiffness & Flexibility: Stiffness / Rigid Axle
Journal Diameter Dimensional Accuracy: Customized
Transport Package: Cartons or Wooden Box
Specification: 16-120

###

Samples:
US$ 10/Set
1 Set(Min.Order)

|
Request Sample

###

Customization:

###

Product name Ball spline
Model GJZ,GJZA,GJF,GJH,GJZG,GJFG,
Dia 15mm-150mm
Material Bearing Steel
Precision Class Normal/ High/ Precise
Package Plastic bag, box, carton
MOQ 1pc

###

Code and type Nominal axial dia.
d0
External dia.
D
Length of spline nut
L1
Max. length of shaft
L
Standard rated torque Basic rated load
Dynamic torsion
N-m
Stationary torsion 
N-m
Dynamic load
C kN
Static load
C0 kN
GJZG16 / GJFG16 16 31 50 500 32 30 7.5 15.6
GJZG20 / GJFG20 20 35 63 600 55 55 10.1 24.7
GJZG25 / GJFG25 25 42 71 800 103 105 13.7 30.1
GJZG30 / GJFG30 30 48 80 1400 148 171 17.1 37.1
GJZG40 / GJFG40 40 64 100 1500 375 415 32.1 70.2
GJZG50 / GJFG50 50 80 125 1500 760 840 49.4 104.9
GJZG60 / GJFG60 60 90 140 1500 1040 1220 64.2 128.2
GJZG80 / GJFG80 80 120 160 1700 1920 2310 87.3 170.7
GJZG100/ GJFG100 100 150 190 1900 3010 3730 109.9 222
GJZG120 / GJFG120 120 180 220 1900 4100 5200 176.5 347
Material: Gcr15
Load: Customized
Stiffness & Flexibility: Stiffness / Rigid Axle
Journal Diameter Dimensional Accuracy: Customized
Transport Package: Cartons or Wooden Box
Specification: 16-120

###

Samples:
US$ 10/Set
1 Set(Min.Order)

|
Request Sample

###

Customization:

###

Product name Ball spline
Model GJZ,GJZA,GJF,GJH,GJZG,GJFG,
Dia 15mm-150mm
Material Bearing Steel
Precision Class Normal/ High/ Precise
Package Plastic bag, box, carton
MOQ 1pc

###

Code and type Nominal axial dia.
d0
External dia.
D
Length of spline nut
L1
Max. length of shaft
L
Standard rated torque Basic rated load
Dynamic torsion
N-m
Stationary torsion 
N-m
Dynamic load
C kN
Static load
C0 kN
GJZG16 / GJFG16 16 31 50 500 32 30 7.5 15.6
GJZG20 / GJFG20 20 35 63 600 55 55 10.1 24.7
GJZG25 / GJFG25 25 42 71 800 103 105 13.7 30.1
GJZG30 / GJFG30 30 48 80 1400 148 171 17.1 37.1
GJZG40 / GJFG40 40 64 100 1500 375 415 32.1 70.2
GJZG50 / GJFG50 50 80 125 1500 760 840 49.4 104.9
GJZG60 / GJFG60 60 90 140 1500 1040 1220 64.2 128.2
GJZG80 / GJFG80 80 120 160 1700 1920 2310 87.3 170.7
GJZG100/ GJFG100 100 150 190 1900 3010 3730 109.9 222
GJZG120 / GJFG120 120 180 220 1900 4100 5200 176.5 347

The Different Types of Splines in a Splined Shaft

A splined shaft is a machine component with internal and external splines. The splines are formed in four different ways: Involute, Parallel, Serrated, and Ball. You can learn more about each type of spline in this article. When choosing a splined shaft, be sure to choose the right one for your application. Read on to learn about the different types of splines and how they affect the shaft’s performance.
splineshaft

Involute splines

Involute splines in a splined shaft are used to secure and extend mechanical assemblies. They are smooth, inwardly curving grooves that resist separation during operation. A shaft with involute splines is often longer than the shaft itself. This feature allows for more axial movement. This is beneficial for many applications, especially in a gearbox.
The involute spline is a shaped spline, similar to a parallel spline. It is angled and consists of teeth that create a spiral pattern that enables linear and rotatory motion. It is distinguished from other splines by the serrations on its flanks. It also has a flat top. It is a good option for couplers and other applications where angular movement is necessary.
Involute splines are also called involute teeth because of their shape. They are flat on the top and curved on the sides. These teeth can be either internal or external. As a result, involute splines provide greater surface contact, which helps reduce stress and fatigue. Regardless of the shape, involute splines are generally easy to machine and fit.
Involute splines are a type of splines that are used in splined shafts. These splines have different names, depending on their diameters. An example set of designations is for a 32-tooth male spline, a 2,500-tooth module, and a 30 degree pressure angle. An example of a female spline, a fillet root spline, is used to describe the diameter of the splined shaft.
The effective tooth thickness of splines is dependent on the number of keyways and the type of spline. Involute splines in splined shafts should be designed to engage 25 to 50 percent of the spline teeth during the coupling. Involute splines should be able to withstand the load without cracking.

Parallel splines

Parallel splines are formed on a splined shaft by putting one or more teeth into another. The male spline is positioned at the center of the female spline. The teeth of the male spline are also parallel to the shaft axis, but a common misalignment causes the splines to roll and tilt. This is common in many industrial applications, and there are a number of ways to improve the performance of splines.
Typically, parallel splines are used to reduce friction in a rotating part. The splines on a splined shaft are narrower on the end face than the interior, which makes them more prone to wear. This type of spline is used in a variety of industries, such as machinery, and it also allows for greater efficiency when transmitting torque.
Involute splines on a splined shaft are the most common. They have equally spaced teeth, and are therefore less likely to crack due to fatigue. They also tend to be easy to cut and fit. However, they are not the best type of spline. It is important to understand the difference between parallel and involute splines before deciding on which spline to use.
The difference between splined and involute splines is the size of the grooves. Involute splines are generally larger than parallel splines. These types of splines provide more torque to the gear teeth and reduce stress during operation. They are also more durable and have a longer life span. And because they are used on farm machinery, they are essential in this type of application.
splineshaft

Serrated splines

A Serrated Splined Shaft has several advantages. This type of shaft is highly adjustable. Its large number of teeth allows large torques, and its shorter tooth width allows for greater adjustment. These features make this type of shaft an ideal choice for applications where accuracy is critical. Listed below are some of the benefits of this type of shaft. These benefits are just a few of the advantages. Learn more about this type of shaft.
The process of hobbing is inexpensive and highly accurate. It is useful for external spline shafts, but is not suitable for internal splines. This type of process forms synchronized shapes on the shaft, reducing the manufacturing cycle and stabilizing the relative phase between spline and thread. It uses a grinding wheel to shape the shaft. CZPT Manufacturing has a large inventory of Serrated Splined Shafts.
The teeth of a Serrated Splined Shaft are designed to engage with the hub over the entire circumference of the shaft. The teeth of the shaft are spaced uniformly around the spline, creating a multiple-tooth point of contact over the entire length of the shaft. The results of these analyses are usually satisfactory. But there are some limitations. To begin with, the splines of the Serrated Splined Shaft should be chosen carefully. If the application requires large-scale analysis, it may be necessary to modify the design.
The splines of the Serrated Splined Shaft are also used for other purposes. They can be used to transmit torque to another device. They also act as an anti-rotational device and function as a linear guide. Both the design and the type of splines determine the function of the Splined Shaft. In the automobile industry, they are used in vehicles, aerospace, earth-moving machinery, and many other industries.

Ball splines

The invention relates to a ball-spinned shaft. The shaft comprises a plurality of balls that are arranged in a series and are operatively coupled to a load path section. The balls are capable of rolling endlessly along the path. This invention also relates to a ball bearing. Here, a ball bearing is one of the many types of gears. The following discussion describes the features of a ball bearing.
A ball-splined shaft assembly comprises a shaft with at least one ball-spline groove and a plurality of circumferential step grooves. The shaft is held in a first holding means that extends longitudinally and is rotatably held by a second holding means. Both the shaft and the first holding means are driven relative to one another by a first driving means. It is possible to manufacture a ball-splined shaft in a variety of ways.
A ball-splined shaft features a nut with recirculating balls. The ball-splined nut rides in these grooves to provide linear motion while preventing rotation. A splined shaft with a nut that has recirculating balls can also provide rotary motion. A ball splined shaft also has higher load capacities than a ball bushing. For these reasons, ball splines are an excellent choice for many applications.
In this invention, a pair of ball-spinned shafts are housed in a box under a carrier device 40. Each of the two shafts extends along a longitudinal line of arm 50. One end of each shaft is supported rotatably by a slide block 56. The slide block also has a support arm 58 that supports the center arm 50 in a cantilever fashion.
splineshaft

Sector no-go gage

A no-go gauge is a tool that checks the splined shaft for oversize. It is an effective way to determine the oversize condition of a splined shaft without removing the shaft. It measures external splines and serrations. The no-go gage is available in sizes ranging from 19mm to 130mm with a 25mm profile length.
The sector no-go gage has two groups of diametrally opposed teeth. The space between them is manufactured to a maximum space width and the tooth thickness must be within a predetermined tolerance. This gage would be out of tolerance if the splines were measured with a pin. The dimensions of this splined shaft can be found in the respective ANSI or DIN standards.
The go-no-go gage is useful for final inspection of thread pitch diameter. It is also useful for splined shafts and threaded nuts. The thread of a screw must match the contour of the go-no-go gage head to avoid a no-go condition. There is no substitute for a quality machine. It is an essential tool for any splined shaft and fastener manufacturer.
The NO-GO gage can detect changes in tooth thickness. It can be calibrated under ISO17025 standards and has many advantages over a non-go gage. It also gives a visual reference of the thickness of a splined shaft. When the teeth match, the shaft is considered ready for installation. It is a critical process. In some cases, it is impossible to determine the precise length of the shaft spline.
The 45-degree pressure angle is most commonly used for axles and torque-delivering members. This pressure angle is the most economical in terms of tool life, but the splines will not roll neatly like a 30 degree angle. The 45-degree spline is more likely to fall off larger than the other two. Oftentimes, it will also have a crowned look. The 37.5 degree pressure angle is a compromise between the other two pressure angles. It is often used when the splined shaft material is harder than usual.

China China Manufacturer High Quality Gjzg50 Ball Spline Shaft     differential drive shaftChina China Manufacturer High Quality Gjzg50 Ball Spline Shaft     differential drive shaft
editor by czh 2022-12-12