Merchandise Description
| Material: | Aluminum (6061-T6, 6063, 7075-T6,5052) and so on… Brass/Copper/Bronze etc… Stainless Metal (302, 303, 304, 316, 420) and so on… Metal (moderate metal, Q235, 20#, 45#) and so on… Plastic (Stomach muscles, Delrin, PP, PE, Personal computer, Acrylic) and so forth… |
| Approach: | CNC Machining, CNC Turning, CNC Milling, CNC Lathe, CNC boring, CNC grinding, CNC drilling etc… |
| Surface treatment: | Obvious/color anodized Difficult anodized Powder-coating Sand-blasting Portray Nickel plating Chrome plating Zinc plating Silver/golden plating Black oxide coating, Polishing etc… |
| General Tolerance: (+/-mm) |
+/-.001mm or +/- 0.00004″ |
| Certification: | ISO9001:2008, TS-16949 |
| Knowledge: | 15years of CNC machining products 3years of automation machine manufacturing |
| Guide time : | In standard:7-15days Particular custom support: making arrangement upon customers’ request |
| Bare minimum Purchase: | Comply with customer’s demand |
| Packaging : | Normal: pearl cotton and bubble bag, carton box and seal For huge and massive amount: pallet or as for every customers’ requirement |
| Term of Payment: | T/T, Paypal, Trade assurance and so forth… |
| Supply way: | Express(DHL,Fedex, UPS,TNT,EMS), By Sea, By air, or on your requirement |
| Maine equipment: |
Machining center, CNC, Lathe, Turning device, Milling device, Drilling machine, Inside and external grinding machine, Cylindrical grinding machine, Tapping drilling device, Wire chopping device and so on. |
| Tests facility: |
Coordinate measuring equipment, projector, roughness tester, hardness tester, concentricity tester. Peak tester |
| Merchandise Tag: |
mini cnc milling device for sale |
one.Q:Are you buying and selling firm or producer?
A: We are factory with far more then 15years experience
2.Q: How extended is your shipping and delivery time?
A: Normally it is 15-30days as we are Tailored service we confirm with Customer
when area get
three.Q:Do you supply samples? ls it free of charge or extra?
A: Of course we offer samples .for sample cost as for every sample issue to determine free
or charged ,normally for not too much time used consumed machining procedure are cost-free
four.Q:What is your phrases of payment?
thirty% T/T in progress balance just before cargo .Or as for each discussion
5.Q: Can we know the manufacturing method with out going to the manufacturing facility?
A:We will offer you thorough creation routine and send weekly reports with electronic
photographs and video clips which demonstrate the machining development
6.Q:Obtainable for custom-made design drawings?
A: YesDWG.DXF.DXW.IGES.Stage. PDF and so forth
7.Q:Offered for personalized layout drawings?
A: Sure ,we can indication the NDA just before your deliver the drawing
eight.Q:How do you guarantee the high quality?
A:(1) Checking the uncooked materials following they get to our manufacturing facility——
Incoming good quality manage(IQC)
(2) Checking the specifics ahead of the manufacturing line operated
(3) Have a total inspection and routing inspection for the duration of mass production—
In-method high quality manage(IPQC)
(4) Examining the products after they are finished—- Ultimate quality handle(FQC)
(5) Checking the goods soon after they are finished—–Outgoing top quality management(QC)
(6)100% inspection and shipping and delivery just before shipment.
|
US $0.5 / Piece | |
100 Pieces (Min. Order) |
###
| Material: | Carbon Steel |
|---|---|
| Load: | Drive Shaft |
| Stiffness & Flexibility: | Flexible Shaft |
| Journal Diameter Dimensional Accuracy: | IT01-IT5 |
| Axis Shape: | Straight Shaft |
| Shaft Shape: | Stepped Shaft |
###
| Samples: |
US$ 1/Piece
1 Piece(Min.Order) |
|---|
###
| Customization: |
Available
|
|---|
###
| Material: | Aluminum (6061-T6, 6063, 7075-T6,5052) etc… Brass/Copper/Bronze etc… Stainless Steel (302, 303, 304, 316, 420) etc… Steel (mild steel, Q235, 20#, 45#) etc… Plastic (ABS, Delrin, PP, PE, PC, Acrylic) etc… |
| Process: | CNC Machining, CNC Turning, CNC Milling, CNC Lathe, CNC boring, CNC grinding, CNC drilling etc… |
| Surface treatment: | Clear/color anodized; Hard anodized; Powder-coating; Sand-blasting; Painting; Nickel plating; Chrome plating; Zinc plating; Silver/golden plating; Black oxide coating, Polishing etc… |
| General Tolerance: (+/-mm) |
+/-0.001mm or +/- 0.00004" |
| Certification: | ISO9001:2008, TS-16949 |
| Experience: | 15years of CNC machining products 3years of automation machine manufacturing |
| Lead time : | In general:7-15days Special custom service: making arrangement upon customers’ request |
| Minimum Order: | Comply with customer’s demand |
| Packaging : | Standard: pearl cotton and bubble bag, carton box and seal For large and big quantity: pallet or as per customers’ requirement |
| Term of Payment: | T/T, Paypal, Trade assurance etc… |
| Delivery way: | Express(DHL,Fedex, UPS,TNT,EMS), By Sea, By air, or on your requirement |
| Maine equipment: |
Machining center, CNC, Lathe, Turning machine, Milling machine, Drilling machine, Internal and external grinding machine, Cylindrical grinding machine, Tapping drilling machine, Wire cutting machine etc. |
| Testing facility: |
Coordinate measuring machine, projector, roughness tester, hardness tester, concentricity tester. Height tester |
| Item Tag: |
mini cnc milling machine for sale |
|
US $0.5 / Piece | |
100 Pieces (Min. Order) |
###
| Material: | Carbon Steel |
|---|---|
| Load: | Drive Shaft |
| Stiffness & Flexibility: | Flexible Shaft |
| Journal Diameter Dimensional Accuracy: | IT01-IT5 |
| Axis Shape: | Straight Shaft |
| Shaft Shape: | Stepped Shaft |
###
| Samples: |
US$ 1/Piece
1 Piece(Min.Order) |
|---|
###
| Customization: |
Available
|
|---|
###
| Material: | Aluminum (6061-T6, 6063, 7075-T6,5052) etc… Brass/Copper/Bronze etc… Stainless Steel (302, 303, 304, 316, 420) etc… Steel (mild steel, Q235, 20#, 45#) etc… Plastic (ABS, Delrin, PP, PE, PC, Acrylic) etc… |
| Process: | CNC Machining, CNC Turning, CNC Milling, CNC Lathe, CNC boring, CNC grinding, CNC drilling etc… |
| Surface treatment: | Clear/color anodized; Hard anodized; Powder-coating; Sand-blasting; Painting; Nickel plating; Chrome plating; Zinc plating; Silver/golden plating; Black oxide coating, Polishing etc… |
| General Tolerance: (+/-mm) |
+/-0.001mm or +/- 0.00004" |
| Certification: | ISO9001:2008, TS-16949 |
| Experience: | 15years of CNC machining products 3years of automation machine manufacturing |
| Lead time : | In general:7-15days Special custom service: making arrangement upon customers’ request |
| Minimum Order: | Comply with customer’s demand |
| Packaging : | Standard: pearl cotton and bubble bag, carton box and seal For large and big quantity: pallet or as per customers’ requirement |
| Term of Payment: | T/T, Paypal, Trade assurance etc… |
| Delivery way: | Express(DHL,Fedex, UPS,TNT,EMS), By Sea, By air, or on your requirement |
| Maine equipment: |
Machining center, CNC, Lathe, Turning machine, Milling machine, Drilling machine, Internal and external grinding machine, Cylindrical grinding machine, Tapping drilling machine, Wire cutting machine etc. |
| Testing facility: |
Coordinate measuring machine, projector, roughness tester, hardness tester, concentricity tester. Height tester |
| Item Tag: |
mini cnc milling machine for sale |
Applications of Spline Couplings
A spline coupling is a highly effective means of connecting two or more components. These types of couplings are very efficient, as they combine linear motion with rotation, and their efficiency makes them a desirable choice in numerous applications. Read on to learn more about the main characteristics and applications of spline couplings. You will also be able to determine the predicted operation and wear. You can easily design your own couplings by following the steps outlined below.
Optimal design
The spline coupling plays an important role in transmitting torque. It consists of a hub and a shaft with splines that are in surface contact without relative motion. Because they are connected, their angular velocity is the same. The splines can be designed with any profile that minimizes friction. Because they are in contact with each other, the load is not evenly distributed, concentrating on a small area, which can deform the hub surface.
Optimal spline coupling design takes into account several factors, including weight, material characteristics, and performance requirements. In the aeronautics industry, weight is an important design factor. S.A.E. and ANSI tables do not account for weight when calculating the performance requirements of spline couplings. Another critical factor is space. Spline couplings may need to fit in tight spaces, or they may be subject to other configuration constraints.
Optimal design of spline couplers may be characterized by an odd number of teeth. However, this is not always the case. If the external spline’s outer diameter exceeds a certain threshold, the optimal spline coupling model may not be an optimal choice for this application. To optimize a spline coupling for a specific application, the user may need to consider the sizing method that is most appropriate for their application.
Once a design is generated, the next step is to test the resulting spline coupling. The system must check for any design constraints and validate that it can be produced using modern manufacturing techniques. The resulting spline coupling model is then exported to an optimisation tool for further analysis. The method enables a designer to easily manipulate the design of a spline coupling and reduce its weight.
The spline coupling model 20 includes the major structural features of a spline coupling. A product model software program 10 stores default values for each of the spline coupling’s specifications. The resulting spline model is then calculated in accordance with the algorithm used in the present invention. The software allows the designer to enter the spline coupling’s radii, thickness, and orientation.
Characteristics
An important aspect of aero-engine splines is the load distribution among the teeth. The researchers have performed experimental tests and have analyzed the effect of lubrication conditions on the coupling behavior. Then, they devised a theoretical model using a Ruiz parameter to simulate the actual working conditions of spline couplings. This model explains the wear damage caused by the spline couplings by considering the influence of friction, misalignment, and other conditions that are relevant to the splines’ performance.
In order to design a spline coupling, the user first inputs the design criteria for sizing load carrying sections, including the external spline 40 of the spline coupling model 30. Then, the user specifies torque margin performance requirement specifications, such as the yield limit, plastic buckling, and creep buckling. The software program then automatically calculates the size and configuration of the load carrying sections and the shaft. These specifications are then entered into the model software program 10 as specification values.
Various spline coupling configuration specifications are input on the GUI screen 80. The software program 10 then generates a spline coupling model by storing default values for the various specifications. The user then can manipulate the spline coupling model by modifying its various specifications. The final result will be a computer-aided design that enables designers to optimize spline couplings based on their performance and design specifications.
The spline coupling model software program continually evaluates the validity of spline coupling models for a particular application. For example, if a user enters a data value signal corresponding to a parameter signal, the software compares the value of the signal entered to the corresponding value in the knowledge base. If the values are outside the specifications, a warning message is displayed. Once this comparison is completed, the spline coupling model software program outputs a report with the results.
Various spline coupling design factors include weight, material properties, and performance requirements. Weight is one of the most important design factors, particularly in the aeronautics field. ANSI and S.A.E. tables do not consider these factors when calculating the load characteristics of spline couplings. Other design requirements may also restrict the configuration of a spline coupling.
Applications
Spline couplings are a type of mechanical joint that connects two rotating shafts. Its two parts engage teeth that transfer load. Although splines are commonly over-dimensioned, they are still prone to fatigue and static behavior. These properties also make them prone to wear and tear. Therefore, proper design and selection are vital to minimize wear and tear on splines. There are many applications of spline couplings.
A key design is based on the size of the shaft being joined. This allows for the proper spacing of the keys. A novel method of hobbing allows for the formation of tapered bases without interference, and the root of the keys is concentric with the axis. These features enable for high production rates. Various applications of spline couplings can be found in various industries. To learn more, read on.
FE based methodology can predict the wear rate of spline couplings by including the evolution of the coefficient of friction. This method can predict fretting wear from simple round-on-flat geometry, and has been calibrated with experimental data. The predicted wear rate is reasonable compared to the experimental data. Friction evolution in spline couplings depends on the spline geometry. It is also crucial to consider the lubrication condition of the splines.
Using a spline coupling reduces backlash and ensures proper alignment of mated components. The shaft’s splined tooth form transfers rotation from the splined shaft to the internal splined member, which may be a gear or other rotary device. A spline coupling’s root strength and torque requirements determine the type of spline coupling that should be used.
The spline root is usually flat and has a crown on one side. The crowned spline has a symmetrical crown at the centerline of the face-width of the spline. As the spline length decreases toward the ends, the teeth are becoming thinner. The tooth diameter is measured in pitch. This means that the male spline has a flat root and a crowned spline.
Predictability
Spindle couplings are used in rotating machinery to connect two shafts. They are composed of two parts with teeth that engage each other and transfer load. Spline couplings are commonly over-dimensioned and are prone to static and fatigue behavior. Wear phenomena are also a common problem with splines. To address these issues, it is essential to understand the behavior and predictability of these couplings.
Dynamic behavior of spline-rotor couplings is often unclear, particularly if the system is not integrated with the rotor. For example, when a misalignment is not present, the main response frequency is one X-rotating speed. As the misalignment increases, the system starts to vibrate in complex ways. Furthermore, as the shaft orbits depart from the origin, the magnitudes of all the frequencies increase. Thus, research results are useful in determining proper design and troubleshooting of rotor systems.
The model of misaligned spline couplings can be obtained by analyzing the stress-compression relationships between two spline pairs. The meshing force model of splines is a function of the system mass, transmitting torque, and dynamic vibration displacement. This model holds when the dynamic vibration displacement is small. Besides, the CZPT stepping integration method is stable and has high efficiency.
The slip distributions are a function of the state of lubrication, coefficient of friction, and loading cycles. The predicted wear depths are well within the range of measured values. These predictions are based on the slip distributions. The methodology predicts increased wear under lightly lubricated conditions, but not under added lubrication. The lubrication condition and coefficient of friction are the key factors determining the wear behavior of splines.
editor by czh 2023-01-09