Tag Archives: tractor wheel

China Good quality China 100HP 4*4WD Farming Agricultural Agri Wheel Farm Tractor drive shaft parts

Product Description

100HP 4*4WD Farming Agricultural Agri Wheel Farm Tractor

With ROPS

With Cabin

With Sunshade Roof

Technical Parameters

Model No. TL1004
Type 4*4
Engine Model QC4115TA
Rated power(kw) 73.5
RPM 2300
Overall dimension (L*W*H) 4365*2048*3060
Tread(mm) Front 1610(Can be adjusted to 1950)
Rear 1620(Can be adjusted to 2571)
Wheelbase 2195
Clutch Type Single blade,dry,butterfly spring pressed, separate operation, double function
Gear Box Two shaft, Straight teeth, differential lock
Gear shift 16F+8R
Weight (kg) 3400
Tyre Front 8.3-24
Rear 14.9-30
PTO(RPM) Rear seperated, 540/1000 rpm
PTO Shaft Spline (mm) 8D-38×32×6

Tractor Features
1.Fuel consumption reach upto 1 liter/hour diesel.
2. Differential lock prevent rear wheels skidding when climbing, operating in paddy land and rainy weather.
3.Equip with double speed of PTO shaft 540/760 rpm. Adapted to different field type.
4.Adopt full hydraulic steering, independent fuel tank, easy operating and high mobility. 
5.Adjustable front and rear tracks meet agricultural needs of different areas. Extra-large water tank and high capacity maintenance-free battery make the machine with best heat-dispersion and starting performance.
6.Can adopt to various implements,such as plough,disc plough,ratory tiller,disc harrow,etc

Service
 
Pre-sales service
1, 24 hours online .Your inquiry will be quick reply  by email . 
 
2,Professionally and patiently introduction,details pictures and working video to show machine .
3,Visting our factory.
 

Service on sales
1,Test every machine and inspect the machine seriously . 
2,Send the machine picture which you order , then packing it with standard export package after you confirm the machine is ok .
3,Delivery:If ship by sea .after delivery to seaport .Will tell you the shipping time and arrival time . Finally, send all original documents to you by Express. We will tell you the tracking number after we post the documents.

After-sales service
1, 24 hours online to solve any problem . Supply you English manual book and technical support , maintain and install video to help you solve the problem, or dispatch worker to your factory.
2 Training how to install the machine, training how to use, maintain and repair the machine.

 
FAQ
1. What is the voltage/phase for this machine ?
220V 50Hz/single phase ,380V 50Hz/three phase .We also could produce according to customer’s requirement.
2. What is your terms of payment?
T/T 30% as deposit, and &70% before delivery. We will show you the photos of the products and packages before you pay the balance.
3. What your terms of delivery?
EXW,FOB,CFR,CIF,DAF.
4. How about your delivery time?
Generally, it will take about 13 days after receipt of deposit payment. The specific delivery time depends on the items and the quantity of your order.
5. What’s your MOQ?
1 set
6. How should I do if meet some trouble while using?
We can supply English manual book and also take a video for showing how to resolve the problems or dispatch our worker to your factory.

 
 

 

After-sales Service: Yes
Warranty: 1 Year
Type: Wheel Tractor
Usage: Farm Tractor, Garden Tractor, Lawn Tractor, Compact Tractor, Diesel Engine Tractor
Certification: ISO, CCC, ISO/TS16949
Drive Wheel: 4WD
Customization:
Available

|

Customized Request

splineshaft

Analytical Approaches to Estimating Contact Pressures in Spline Couplings

A spline coupling is a type of mechanical connection between two rotating shafts. It consists of two parts – a coupler and a coupling. Both parts have teeth which engage and transfer loads. However, spline couplings are typically over-dimensioned, which makes them susceptible to fatigue and static behavior. Wear phenomena can also cause the coupling to fail. For this reason, proper spline coupling design is essential for achieving optimum performance.

Modeling a spline coupling

Spline couplings are becoming increasingly popular in the aerospace industry, but they operate in a slightly misaligned state, causing both vibrations and damage to the contact surfaces. To solve this problem, this article offers analytical approaches for estimating the contact pressures in a spline coupling. Specifically, this article compares analytical approaches with pure numerical approaches to demonstrate the benefits of an analytical approach.
To model a spline coupling, first you create the knowledge base for the spline coupling. The knowledge base includes a large number of possible specification values, which are related to each other. If you modify one specification, it may lead to a warning for violating another. To make the design valid, you must create a spline coupling model that meets the specified specification values.
After you have modeled the geometry, you must enter the contact pressures of the two spline couplings. Then, you need to determine the position of the pitch circle of the spline. In Figure 2, the centre of the male coupling is superposed to that of the female spline. Then, you need to make sure that the alignment meshing distance of the two splines is the same.
Once you have the data you need to create a spline coupling model, you can begin by entering the specifications for the interface design. Once you have this data, you need to choose whether to optimize the internal spline or the external spline. You’ll also need to specify the tooth friction coefficient, which is used to determine the stresses in the spline coupling model 20. You should also enter the pilot clearance, which is the clearance between the tip 186 of a tooth 32 on one spline and the feature on the mating spline.
After you have entered the desired specifications for the external spline, you can enter the parameters for the internal spline. For example, you can enter the outer diameter limit 154 of the major snap 54 and the minor snap 56 of the internal spline. The values of these parameters are displayed in color-coded boxes on the Spline Inputs and Configuration GUI screen 80. Once the parameters are entered, you’ll be presented with a geometric representation of the spline coupling model 20.

Creating a spline coupling model 20

The spline coupling model 20 is created by a product model software program 10. The software validates the spline coupling model against a knowledge base of configuration-dependent specification constraints and relationships. This report is then input to the ANSYS stress analyzer program. It lists the spline coupling model 20’s geometric configurations and specification values for each feature. The spline coupling model 20 is automatically recreated every time the configuration or performance specifications of the spline coupling model 20 are modified.
The spline coupling model 20 can be configured using the product model software program 10. A user specifies the axial length of the spline stack, which may be zero, or a fixed length. The user also enters a radial mating face 148, if any, and selects a pilot clearance specification value of 14.5 degrees or 30 degrees.
A user can then use the mouse 110 to modify the spline coupling model 20. The spline coupling knowledge base contains a large number of possible specification values and the spline coupling design rule. If the user tries to change a spline coupling model, the model will show a warning about a violation of another specification. In some cases, the modification may invalidate the design.
In the spline coupling model 20, the user enters additional performance requirement specifications. The user chooses the locations where maximum torque is transferred for the internal and external splines 38 and 40. The maximum torque transfer location is determined by the attachment configuration of the hardware to the shafts. Once this is selected, the user can click “Next” to save the model. A preview of the spline coupling model 20 is displayed.
The model 20 is a representation of a spline coupling. The spline specifications are entered in the order and arrangement as specified on the spline coupling model 20 GUI screen. Once the spline coupling specifications are entered, the product model software program 10 will incorporate them into the spline coupling model 20. This is the last step in spline coupling model creation.
splineshaft

Analysing a spline coupling model 20

An analysis of a spline coupling model consists of inputting its configuration and performance specifications. These specifications may be generated from another computer program. The product model software program 10 then uses its internal knowledge base of configuration dependent specification relationships and constraints to create a valid three-dimensional parametric model 20. This model contains information describing the number and types of spline teeth 32, snaps 34, and shoulder 36.
When you are analysing a spline coupling, the software program 10 will include default values for various specifications. The spline coupling model 20 comprises an internal spline 38 and an external spline 40. Each of the splines includes its own set of parameters, such as its depth, width, length, and radii. The external spline 40 will also contain its own set of parameters, such as its orientation.
Upon selecting these parameters, the software program will perform various analyses on the spline coupling model 20. The software program 10 calculates the nominal and maximal tooth bearing stresses and fatigue life of a spline coupling. It will also determine the difference in torsional windup between an internal and an external spline. The output file from the analysis will be a report file containing model configuration and specification data. The output file may also be used by other computer programs for further analysis.
Once these parameters are set, the user enters the design criteria for the spline coupling model 20. In this step, the user specifies the locations of maximum torque transfer for both the external and internal spline 38. The maximum torque transfer location depends on the configuration of the hardware attached to the shafts. The user may enter up to four different performance requirement specifications for each spline.
The results of the analysis show that there are two phases of spline coupling. The first phase shows a large increase in stress and vibration. The second phase shows a decline in both stress and vibration levels. The third stage shows a constant meshing force between 300N and 320N. This behavior continues for a longer period of time, until the final stage engages with the surface.
splineshaft

Misalignment of a spline coupling

A study aimed to investigate the position of the resultant contact force in a spline coupling engaging teeth under a steady torque and rotating misalignment. The study used numerical methods based on Finite Element Method (FEM) models. It produced numerical results for nominal conditions and parallel offset misalignment. The study considered two levels of misalignment – 0.02 mm and 0.08 mm – with different loading levels.
The results showed that the misalignment between the splines and rotors causes a change in the meshing force of the spline-rotor coupling system. Its dynamics is governed by the meshing force of splines. The meshing force of a misaligned spline coupling is related to the rotor-spline coupling system parameters, the transmitting torque, and the dynamic vibration displacement.
Despite the lack of precise measurements, the misalignment of splines is a common problem. This problem is compounded by the fact that splines usually feature backlash. This backlash is the result of the misaligned spline. The authors analyzed several splines, varying pitch diameters, and length/diameter ratios.
A spline coupling is a two-dimensional mechanical system, which has positive backlash. The spline coupling is comprised of a hub and shaft, and has tip-to-root clearances that are larger than the backlash. A form-clearance is sufficient to prevent tip-to-root fillet contact. The torque on the splines is transmitted via friction.
When a spline coupling is misaligned, a torque-biased thrust force is generated. In such a situation, the force can exceed the torque, causing the component to lose its alignment. The two-way transmission of torque and thrust is modeled analytically in the present study. The analytical approach provides solutions that can be integrated into the design process. So, the next time you are faced with a misaligned spline coupling problem, make sure to use an analytical approach!
In this study, the spline coupling is analyzed under nominal conditions without a parallel offset misalignment. The stiffness values obtained are the percentage difference between the nominal pitch diameter and load application diameter. Moreover, the maximum percentage difference in the measured pitch diameter is 1.60% under a torque of 5000 N*m. The other parameter, the pitch angle, is taken into consideration in the calculation.

China Good quality China 100HP 4*4WD Farming Agricultural Agri Wheel Farm Tractor   drive shaft parts	China Good quality China 100HP 4*4WD Farming Agricultural Agri Wheel Farm Tractor   drive shaft parts
editor by CX 2023-11-12

China Tractor OEM 70-2407053-01 Drive Gear Wheel Gears Spline Shaft Right drive shaft shop

Merchandise Description

 

Merchandise Description

Gear product Personalized gear shaft accoding to clients sample or drawing
Processing device CNC equipment
Content 20CrMnTi/ 20CrMnMo/ 42CrMo/ forty five#metal/ 40Cr/ 20CrNi2MoA
Heat treattment Carburizing and quenching/ Tempering/ Nitriding/ Carbonitriding/ Induction hardening
Hardness fifty eight-62HRC
Qaulity standerd GB/ DIN/ JIS/ AGMA
Accuracy class five-8 course
Transport Sea transport/ Air shipping and delivery/ Convey

Thorough Photographs

 

1. who are we?
    Founded in November 2000, Xihu (West Lake) Dis.g Seiko Machinery Co., Ltd. is located in Xihu (West Lake) Dis., ZheJiang province
two. how can we guarantee high quality?
Always a pre-production sample just before mass production
Usually final Inspection ahead of cargo

3.what can you acquire from us?
Saic maxus,Great Wall,Foton,JMC,JAC

four. why need to you get from us not from other suppliers?
Specializing in the creation of winding, rotary, wander, crawler crane, dig the reducer gear ring

5. what services can we give?
Approved Delivery Conditions: FOB
Approved Payment Forex:USD
Recognized Payment Kind: T/T,MoneyGram,PayPal,Money
Language Spoken:English,Chinese,FrenchSpecializing in the generation of winding, rotary, stroll, crawler crane, dig the reducer equipment ring

US $60-80
/ kg
|
1,000 kg

(Min. Order)

###

Application: Machinery, Agricultural Machinery, Car
Hardness: Hardened Tooth Surface
Gear Position: Internal Gear
Manufacturing Method: Rolling Gear
Toothed Portion Shape: Spur Gear
Material: Cast Steel

###

Samples:
US$ 700/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

Gear model Customized gear shaft accoding to customers sample or drawing
Processing machine CNC machine
Material 20CrMnTi/ 20CrMnMo/ 42CrMo/ 45#steel/ 40Cr/ 20CrNi2MoA
Heat treattment Carburizing and quenching/ Tempering/ Nitriding/ Carbonitriding/ Induction hardening
Hardness 58-62HRC
Qaulity standerd GB/ DIN/ JIS/ AGMA
Accuracy class 5-8 class
Shipping Sea shipping/ Air shipping/ Express
US $60-80
/ kg
|
1,000 kg

(Min. Order)

###

Application: Machinery, Agricultural Machinery, Car
Hardness: Hardened Tooth Surface
Gear Position: Internal Gear
Manufacturing Method: Rolling Gear
Toothed Portion Shape: Spur Gear
Material: Cast Steel

###

Samples:
US$ 700/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

Gear model Customized gear shaft accoding to customers sample or drawing
Processing machine CNC machine
Material 20CrMnTi/ 20CrMnMo/ 42CrMo/ 45#steel/ 40Cr/ 20CrNi2MoA
Heat treattment Carburizing and quenching/ Tempering/ Nitriding/ Carbonitriding/ Induction hardening
Hardness 58-62HRC
Qaulity standerd GB/ DIN/ JIS/ AGMA
Accuracy class 5-8 class
Shipping Sea shipping/ Air shipping/ Express

What Are the Advantages of a Splined Shaft?

If you are looking for the right splined shaft for your machine, you should know a few important things. First, what type of material should be used? Stainless steel is usually the most appropriate choice, because of its ability to offer low noise and fatigue failure. Secondly, it can be machined using a slotting or shaping machine. Lastly, it will ensure smooth motion. So, what are the advantages of a splined shaft?
Stainless steel is the best material for splined shafts

When choosing a splined shaft, you should consider its hardness, quality, and finish. Stainless steel has superior corrosion and wear resistance. Carbon steel is another good material for splined shafts. Carbon steel has a shallow carbon content (about 1.7%), which makes it more malleable and helps ensure smooth motion. But if you’re not willing to spend the money on stainless steel, consider other options.
There are two main types of splines: parallel splines and crowned splines. Involute splines have parallel grooves and allow linear and rotary motion. Helical splines have involute teeth and are oriented at an angle. This type allows for many teeth on the shaft and minimizes the stress concentration in the stationary joint.
Large evenly spaced splines are widely used in hydraulic systems, drivetrains, and machine tools. They are typically made from carbon steel (CR10) and stainless steel (AISI 304). This material is durable and meets the requirements of ISO 14-B, formerly DIN 5463-B. Splined shafts are typically made of stainless steel or C45 steel, though there are many other materials available.
Stainless steel is the best material for a splined shaft. This metal is also incredibly affordable. In most cases, stainless steel is the best choice for these shafts because it offers the best corrosion resistance. There are many different types of splined shafts, and each one is suited for a particular application. There are also many different types of stainless steel, so choose stainless steel if you want the best quality.
For those looking for high-quality splined shafts, CZPT Spline Shafts offer many benefits. They can reduce costs, improve positional accuracy, and reduce friction. With the CZPT TFE coating, splined shafts can reduce energy and heat buildup, and extend the life of your products. And, they’re easy to install – all you need to do is install them.
splineshaft

They provide low noise, low wear and fatigue failure

The splines in a splined shaft are composed of two main parts: the spline root fillet and the spline relief. The spline root fillet is the most critical part, because fatigue failure starts there and propagates to the relief. The spline relief is more susceptible to fatigue failure because of its involute tooth shape, which offers a lower stress to the shaft and has a smaller area of contact.
The fatigue life of splined shafts is determined by measuring the S-N curve. This is also known as the Wohler curve, and it is the relationship between stress amplitude and number of cycles. It depends on the material, geometry and way of loading. It can be obtained from a physical test on a uniform material specimen under a constant amplitude load. Approximations for low-alloy steel parts can be made using a lower-alloy steel material.
Splined shafts provide low noise, minimal wear and fatigue failure. However, some mechanical transmission elements need to be removed from the shaft during assembly and manufacturing processes. The shafts must still be capable of relative axial movement for functional purposes. As such, good spline joints are essential to high-quality torque transmission, minimal backlash, and low noise. The major failure modes of spline shafts include fretting corrosion, tooth breakage, and fatigue failure.
The outer disc carrier spline is susceptible to tensile stress and fatigue failure. High customer demands for low noise and low wear and fatigue failure makes splined shafts an excellent choice. A fractured spline gear coupling was received for analysis. It was installed near the top of a filter shaft and inserted into the gearbox motor. The service history was unknown. The fractured spline gear coupling had longitudinally cracked and arrested at the termination of the spline gear teeth. The spline gear teeth also exhibited wear and deformation.
A new spline coupling method detects fault propagation in hollow cylindrical splined shafts. A spline coupling is fabricated using an AE method with the spline section unrolled into a metal plate of the same thickness as the cylinder wall. In addition, the spline coupling is misaligned, which puts significant concentration on the spline teeth. This further accelerates the rate of fretting fatigue and wear.
A spline joint should be lubricated after 25 hours of operation. Frequent lubrication can increase maintenance costs and cause downtime. Moreover, the lubricant may retain abrasive particles at the interfaces. In some cases, lubricants can even cause misalignment, leading to premature failure. So, the lubrication of a spline coupling is vital in ensuring proper functioning of the shaft.
The design of a spline coupling can be optimized to enhance its wear resistance and reliability. Surface treatments, loads, and rotation affect the friction properties of a spline coupling. In addition, a finite element method was developed to predict wear of a floating spline coupling. This method is feasible and provides a reliable basis for predicting the wear and fatigue life of a spline coupling.
splineshaft

They can be machined using a slotting or shaping machine

Machines can be used to shape splined shafts in a variety of industries. They are useful in many applications, including gearboxes, braking systems, and axles. A slotted shaft can be manipulated in several ways, including hobbling, broaching, and slotting. In addition to shaping, splines are also useful in reducing bar diameter.
When using a slotting or shaping machine, the workpiece is held against a pedestal that has a uniform thickness. The machine is equipped with a stand column and limiting column (Figure 1), each positioned perpendicular to the upper surface of the pedestal. The limiting column axis is located on the same line as the stand column. During the slotting or shaping process, the tool is fed in and out until the desired space is achieved.
One process involves cutting splines into a shaft. Straddle milling, spline shaping, and spline cutting are two common processes used to create splined shafts. Straddle milling involves a fixed indexing fixture that holds the shaft steady, while rotating milling cutters cut the groove in the length of the shaft. Several passes are required to ensure uniformity throughout the spline.
Splines are a type of gear. The ridges or teeth on the drive shaft mesh with grooves in the mating piece. A splined shaft allows the transmission of torque to a mate piece while maximizing the power transfer. Splines are used in heavy vehicles, construction, agriculture, and massive earthmoving machinery. Splines are used in virtually every type of rotary motion, from axles to transmission systems. They also offer better fatigue life and reliability.
Slotting or shaping machines can also be used to shape splined shafts. Slotting machines are often used to machine splined shafts, because it is easier to make them with these machines. Using a slotting or shaping machine can result in splined shafts of different sizes. It is important to follow a set of spline standards to ensure your parts are manufactured to the highest standards.
A milling machine is another option for producing splined shafts. A spline shaft can be set up between two centers in an indexing fixture. Two side milling cutters are mounted on an arbor and a spacer and shims are inserted between them. The arbor and cutters are then mounted to a milling machine spindle. To make sure the cutters center themselves over the splined shaft, an adjustment must be made to the spindle of the machine.
The machining process is very different for internal and external splines. External splines can be broached, shaped, milled, or hobbed, while internal splines cannot. These machines use hard alloy, but they are not as good for internal splines. A machine with a slotting mechanism is necessary for these operations.

China Tractor OEM 70-2407053-01 Drive Gear Wheel Gears Spline Shaft Right     drive shaft shop	China Tractor OEM 70-2407053-01 Drive Gear Wheel Gears Spline Shaft Right     drive shaft shop
editor by czh 2022-12-26

Best supplier made in China – replacement parts – PTO shaft manufacturer & factory Exporting brush hog pto Agricultural Farm Machinery Wheel Tractor with ce certificate top quality low price

We – EPG Group the largest agricultural gearbox and pto manufacturing unit in China with 5 distinct branches. For much more information: Cellular/whatsapp/telegram/Kakao us at: 0086-13083988828

Best  supplier  made in China - replacement parts - PTO shaft manufacturer & factory Exporting   brush hog pto Agricultural  Farm Machinery Wheel Tractor with ce certificate top quality low price

pto travel shaft yoke It kubota l2501 pto shaft is 52105981ac our ford 8n pto shaft seal intention toyota yaris travel shaft to drive shaft u joint press offer rav4 push shaft replacement cost a pto shaft couplings extensive volvo travel shaft selection taking away pto shaft from tractor of top quality goods at reasonably priced charges, offer the best service for customers pleased and add to our continued improvement. Our firm has sound economic power, builds up a technician team contingent with higher quality, possesses the production assembly line of technicalization in China and excellent technique checking on product good quality and operates marketing and advertising networks throughout the place.

Product Description

one, binheng provides a broad variety of tractors from sixteen HP to 225 HP
2, binheng 20 ~ 55HP tractor EPA 4 accepted
3, binheng 16 ~ 45HP tractor EEC/E-MARK accredited provide COC report
4, All OECD approved

Obtainable implements:
Entrance stop loader, hydraulic backhoe entrance, plough, rotary cultivator, seed drill, Excavator, one shaft or hydraulic dump trailer, PTO shaft driving water pump Or generator, chipper, ditching machine, mower, snow blower

Xihu (West Lake) Dis.ng gives a broad option of characteristics across the full selection of tractors. Energy steering, 2WD/Four wheel drive alternatives, Cabin, Roll More than Protection bar, canopy, Decision of tyres i. e turf tyres, industrial tyres, High lug tyres are available across the variety.

Xihu (West Lake) Dis.ng owns the selection of attributes, helps make it one the most appropriate tractors for a host of programs. The tractors are suited for backyard garden applications, pastime applications, soaked & dry land programs, transportation in basic or hilly locations.

binheng’s utility of the tractor is further increased by the offering of a complete assortment of matching implements like loaders, backhoe, post gap digger, scraper, leveler, rotavator, tiller, cultivator, plough, harrows, wood chipper, mower, snow Blower and so on.

binhengoffers the backed up by qualified manpower, spares parts & provider supports at the closest distribution stage in all the countries.

The binheng model of tractors are getting constructed to give a absolutely satisfying knowledge to the clients.

 

Best  supplier  made in China - replacement parts - PTO shaft manufacturer & factory Exporting   brush hog pto Agricultural  Farm Machinery Wheel Tractor with ce certificate top quality low price

Best supplier made in China – replacement parts – PTO shaft manufacturer & factory Hot honda gx120 pto shaft size Selling Dq854 85HP 4WD Four Wheel Drive Agricultural Farm Tractor with Rops with ce certificate top quality low price

We – EPG Group the biggest agricultural gearbox and pto factory in China with 5 diverse branches. For a lot more specifics: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828

Best  supplier  made in China - replacement parts - PTO shaft manufacturer & factory Hot   honda gx120 pto shaft size Selling Dq854 85HP 4WD Four Wheel Drive Agricultural Farm Tractor with Rops with ce certificate top quality low price

bush hog slip clutch Our vito propshaft items kubota tractor pto shaft go over is drive shaft vios well-liked fifty six inch driveshaft exported s13 driveshaft to pto shaft retains breaking the pto knuckle joint United utilized driveshafts for sale in close proximity to me States, 2004 kia sorento generate shaft Germany, Australia, Russia, Spain, Hungary, Zimbabwe, Ukraine, Nigeria, Peru, Brazil, Center and South The us, Thailand, Pakistan, Indonesia, a lot more than 60 countries and areas. Our items are marketing effectively in Chinese marketplaces and some merchandise sold in worldwide markets are nicely received by Chinese and international clients at property and overseas. Sizzling promoting DQ854 85HP Four wheel drive 4 wheel generate Agricultural farm tractor with ROPS

Tractor Principal Functions and Advantages:
1.Geared up well-known manufacturer engine demonstrating innovative ability,minimal fuel usage,large financial performance.
two. Streamlined appearance layout, stunning and generous.
three.Transmission Circumstance adopt meshed shift and include the gearbox interlock system tends to make the procedure much more effortlessly,dependable and easier.
4. Double action clutch with disc spring, complete steadily and simple to operate.
5. Entirely hydraulic steering program tremendously lowered driver’s function energy.
six. Soaked disc brake gadget, reputable brake performance.
7. Different injection of hydraulic oil, trustworthy to operate.
8. The lifter with power and placement adjustment, with dependable carry.
nine. Tractor PTO:
PTO in Double speed : 540/760r/min Optional, For high operating effectiveness.
PTO shaft of 6 or 8 spline Optional, adaptable for agricultural equipment of all more than the globe.
10. Large Chassis and Weighty-duty Rear axle for Resilient Robust equipment.
11. Total sequence mild, ROPS,Sunshade/Canopy, Enthusiast/Heater/Air-conditioned cabin are all offered, for more comfy driving surroundings. 

Tractor Primary specificaiton and Complex parameters:

Tractor Model  DQ854
Drive type 4WD
Engine
Engine model  EPT or Yuchai brand name, 4 cylinder EPT motor
Capacity of fuel tank(L) 150
Engine power(kw/hp) 62.5kw/85HP
PTO power at rated speed (kw) 53
Transmission 
Clutch  Dry,dual-stage type
PTO Speed(rpm)  540/1000 or 760/one thousand
Gearshift     8F+4R(frequent) /16F+8R(optional)/8F+8R(optional)  
Hydraulic system 
Hydraulic output valve 2-Team (optional)
Three point linkage 
Category of 3-point link Category II
Lifting force (at point of 610mm)KN >16
Technical parameter 
Dimension LxWxH (mm)  4593x2050x2810
Wheel base(mm) 2195
Track base(mm) front wheel 1610
Track base(mm) rear wheel  1620-2571(usual 1620)
The smallest clearance(mm) 379
Front tyre 11.2-24
Rear tyre 16.9-34(typical) / 18.4-thirty(optional) 
Optional Configurations
Common cabin with Fan Heater cabin AC cabin ROPS Canopy (Sunshade) 8F+8R shuttle gearshift, 16F+4R creeper gearshift, 2-Team Hydraulic output valve Front ballastRear ballast Paddy tire, eighteen.4-thirty large rear tire, Air brake, Swing draw bar
Loading Amount/40HC 3 Sets in Nude packing for CBU transport

DQ854 85HP 4 wheel drive Tractor detai EPT demonstrating :

EPT Manufacturing Line:

Strictly Inspecting and Complete Testing for making certain large quality solution :


Tractor Packing and Loading container for Delivering products :

Remember to contact us if you have any demand for our item :

Best cost will be quoted for you as soon as receive your Necessity !

Best  supplier  made in China - replacement parts - PTO shaft manufacturer & factory Hot   honda gx120 pto shaft size Selling Dq854 85HP 4WD Four Wheel Drive Agricultural Farm Tractor with Rops with ce certificate top quality low price