Tag Archives: screw plastic

China Standard Bio Plastic Pellets Twin Screw Extruder Machine Price for Making PP/PE drive shaft assembly parts

Product Description

Bio plastic Pellets twin screw extruder  Machine price for making PP/PE

Product model for your choosing:
(Notes: Different raw materials, the output is different, please tell me what’s the material you want to produce, I will recommend you the correct model.)

Type TSH-20 TSH-35 TSH40 TSH52 TSH65 TSH75 TSH95
Screw Diameter (mm) 22 35.6 41 51.4 62.4 71 93
Screw Speed (rpm) 600 600 600 600 600 600 600
Motor Power (kW) 4 18.5 30 55 90 132 315
L/D 32-60 32-68 32-68 32-68 32-68 32-68 32-68
Output (Kg/h) 2-15 15-95 70-120 155-255 255-400 450-750 950-1600

Product details:

1. Twin screw main extruder: Main motor: Imported “WEG”or “SIEMENS” Variable frequency motor(The frequency converter will automatically change the frequency to reduce the frequency of the motor. The operating current will always run between 80%, 50%, and 30% of the rated power. This will greatly reduce the motor’s operating current and achieve the effect of saving electricity).
 

2. Gearbox: Warranty: 3 years; (2)Concentricity deviation of output shaft and input shaft: within 0.2mm; (3)Both output shaft radial bearings are imported “IKO”and “NSK” bearings;

3. Electric cabinet box: (1)Inverter: Imported Switzerland”ABB”, Japan”TOSHIBA”,”FUJI”; (2)PLC: Imported “SIEMENS” brand; (3)Main electrical controller:”Schneider” brand; (4)Display of electric current:Japan “OMRON” brand; (5)Temperature instruments: Japan “OMRON” brand;
 

4. Twin-screw Barrel

Bimetal wear-resistant and corrosion-resistant material, the base material is 45# steel, after multiple forging, quenching and tempering treatment; the cylinder is inlaid with α-101 wear-resistant and corrosion-resistant alloy bushing, which has better wear resistance and corrosion resistance than general alloy bushings.

5. Screw elements

(1)Material is W6Mo5Cr4V2 (high speed tool steel) with the best wear resistance, the whole adopts vacuum quenching treatment, hardness is 60 ~ 62HRC; (2)Designed by the building block principle, and the screw element and the screw shaft are connected by an involute spline, and the screw combination can be adjusted according to the process requirements; The screw elements are all made by CNC machining center, with good identity and strong process repeat-ability,which is benefit for changing;

6. Screen changer+Die-head: Quick open die-head, convenient and fast, short flow path of the machine head and less material storage can significantly reduce the deterioration of the material’s physical properties, yellowing, black spots and other defects;
 

Machine applications:
(Notes: Our machine can be applied in the production of different plastics, such as color masterbatch, filler masterbatch, engineering plastics, reinforced materials, recycling plastics, biodegradable materials and so on.)

Our certificates:
Tengda has obtained High-tech Enterprise and National High-tech Enterprise award.
We have passed ISO,TUV,CE Certifications, more than 30 patents.

Our customers:

Related products:
product-list-1.html

 

After-sales Service: 7*24 Hours Online Service
Warranty: Gearbox: 3 Years; Extruder: 1 Year
Raw Material: PP PE Ect. High Filler Masterbatch
Screw: Double-Screw
Inverter: Inverter
Electromagnetic Heater: Without Electromagnetic Heater
Samples:
US$ 50/Set
1 Set(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

splineshaft

Standard Length Splined Shafts

Standard Length Splined Shafts are made from Mild Steel and are perfect for most repair jobs, custom machinery building, and many other applications. All stock splined shafts are 2-3/4 inches in length, and full splines are available in any length, with additional materials and working lengths available upon request and quotation. CZPT Manufacturing Company is proud to offer these standard length shafts.

Disc brake mounting interfaces that are splined

There are two common disc brake mounting interfaces, splined and center lock. Disc brakes with splined interfaces are more common. They are usually easier to install. The center lock system requires a tool to remove the locking ring on the disc hub. Six-bolt rotors are easier to install and require only six bolts. The center lock system is commonly used with performance road bikes.
Post mount disc brakes require a post mount adapter, while flat mount disc brakes do not. Post mount adapters are more common and are used for carbon mountain bikes, while flat mount interfaces are becoming the norm on road and gravel bikes. All disc brake adapters are adjustable for rotor size, though. Road bikes usually use 160mm rotors while mountain bikes use rotors that are 180mm or 200mm.
splineshaft

Disc brake mounting interfaces that are helical splined

A helical splined disc brake mounting interface is designed with a splined connection between the hub and brake disc. This splined connection allows for a relatively large amount of radial and rotational displacement between the disc and hub. A loosely splined interface can cause a rattling noise due to the movement of the disc in relation to the hub.
The splines on the brake disc and hub are connected via an air gap. The air gap helps reduce heat conduction from the brake disc to the hub. The present invention addresses problems of noise, heat, and retraction of brake discs at the release of the brake. It also addresses issues with skewing and dragging. If you’re unsure whether this type of mounting interface is right for you, consult your mechanic.
Disc brake mounting interfaces that are helix-splined may be used in conjunction with other components of a wheel. They are particularly useful in disc brake mounting interfaces for hub-to-hub assemblies. The spacer elements, which are preferably located circumferentially, provide substantially the same function no matter how the brake disc rotates. Preferably, three spacer elements are located around the brake disc. Each of these spacer elements has equal clearance between the splines of the brake disc and the hub.
Spacer elements 6 include a helical spring portion 6.1 and extensions in tangential directions that terminate in hooks 6.4. These hooks abut against the brake disc 1 in both directions. The helical spring portion 5.1 and 6.1 have stiffness enough to absorb radial impacts. The spacer elements are arranged around the circumference of the intermeshing zone.
A helical splined disc mount includes a stabilizing element formed as a helical spring. The helical spring extends to the disc’s splines and teeth. The ends of the extension extend in opposite directions, while brackets at each end engage with the disc’s splines and teeth. This stabilizing element is positioned axially over the disc’s width.
Helical splined disc brake mounting interfaces are popular in bicycles and road bicycles. They’re a reliable, durable way to mount your brakes. Splines are widely used in aerospace, and have a higher fatigue life and reliability. The interfaces between the splined disc brake and BB spindle are made from aluminum and acetate.
As the splined hub mounts the disc in a helical fashion, the spring wire and disc 2 will be positioned in close contact. As the spring wire contacts the disc, it creates friction forces that are evenly distributed throughout the disc. This allows for a wide range of axial motion. Disc brake mounting interfaces that are helical splined have higher strength and stiffness than their counterparts.
Disc brake mounting interfaces that are helically splined can have a wide range of splined surfaces. The splined surfaces are the most common type of disc brake mounting interfaces. They are typically made of stainless steel or aluminum and can be used for a variety of applications. However, a splined disc mount will not support a disc with an oversized brake caliper.

China Standard Bio Plastic Pellets Twin Screw Extruder Machine Price for Making PP/PE   drive shaft assembly parts	China Standard Bio Plastic Pellets Twin Screw Extruder Machine Price for Making PP/PE   drive shaft assembly parts
editor by CX 2023-11-11

China Professional Plastic Extruder Parts Extruder Screw Shaft custom drive shaft

Product Description

WR15E Abrasion Resistance Twin Screw Shaft Diameter 10 – 120mm HRC44 Hardness

Production description:

Product name Twin screw shaft Brand name JOINER
Model number 125 Material WR15E WR30 40CrNiMo
Spline type involute inner spline Place of original ZheJiang , China
Size Dia 10-120mm/ L 500-900mm Screw combination Brick patern construction
Construction With or without cooling system LD 36:1 40:1 44:1  48:1
Hardness HRC44
Surface treatment vacuum quenching
Certification ISO9001 2015
Application Plastic industry Wood plastic inflated Food powder coating
For what machine Plastic Wood Food Twin Extruder machine
shaft for APV        KOBE      OMC
Buhler     KraussMaffei     Theysohn
Buss       Berstorff       Toshiba
Clextral      Labtech      USEON
Lantai      others
JSW      Leistritz
Keya     Maris
Our strengths Competitive costs per unit of production
Fast turn round for collection and delivery on refurbished parts
Parts available from stock for a wide range of extruder makes
Comprehensive inspection procedure on all parts prior to dispatch
A time proven quality service
Latest manufacturing techniques and metallurgy, ensuring consistent and reliable performance of parts
Customized solutions to meet specific needs.
Buying Xihu (West Lake) Dis.s Attn:Tracy Han
Tel: 1825717954

We manufacture screw shafts for co-rotating twin screw extruders ranging from 10 mm to 120 mm /Length 500-900mm and over. With cooling system /without cooling system. Our manufacturing specializes in shafts for twin screw extruders and is optimized for flexible order handling.

Types of shaft:

Single keyway      Square keyslot     High torque key button     Dual keyslot

Involute inner spline       Round keyslot       Retackle spline       Client requirements available

 

Material

WR15E       WR30      40CrNiMo

About our Company

Joiner Machinery Co.,Ltd has several years experience in the manufacture and supply of new and refurbished wear parts for all major makes of twin-screw extruders and the Industries involved in plastics industry, chemical industry, powder coating, food food industry, wood plastic etc..
Through close working relationships with our customers we have been able to fulfill their requirements. Flexibility enables us to design and manufacture standard and bespoke components for unique applications. 
Through our highly trained and experienced staff we are able to offer technical support and advice. 
Our strengths are based on many years experience supplying the following:
* Competitive costs per unit of production 
* Fast turn round for collection and delivery on refurbished parts 
* Parts available from stock for a wide range of extruder makes 
* Comprehensive inspection procedure on all parts prior to dispatch 
* A time proven quality service 
* Latest manufacturing techniques and metallurgy, ensuring consistent and reliable performance of parts 
* Customized solutions to meet specific needs.

 

Why choose us?

Packaging  Delivery

Packaging Details: Wooden case, Sea-worthy or export standard.
Port: HangZhou
Lead time: 40-50 days after order confirmation.

 

FAQ

Q: Are you trading company or manufacturer ?

A: We are factory.

Q: Where is your factory located? How can I visit there?

A: Our factory is located in HangZhou, ZheJiang Province, China, 1) You can fly to

HangZhou Airport directly. We will pick you up when you arrive in the airport; All our clients,

from domestic or abroad, are warmly welcome to visit us

Q: What makes you different with others?

A: 1) Our Excellent Service For a quick, no hassle quote just send email to us We

promise to reply with a price within 24 hours – sometimes even within the hour. If you

need an advice, just call our export office, we will answer your

questions immediately. 2) Our quick manufacturing time For Normal orders, we will

promise to produce within 30 working days. As a manufacturer, we can ensure the delivery time according to the formal contract.

Q: What is your terms of payment ?

A: 1) T/T payment; 2) LC;

Transport Package: Wood
Trademark: JOINER
Origin: Sichuan
Samples:
US$ 500/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

splineshaft

How to Calculate Stiffness, Centering Force, Wear and Fatigue Failure of Spline Couplings

There are various types of spline couplings. These couplings have several important properties. These properties are: Stiffness, Involute splines, Misalignment, Wear and fatigue failure. To understand how these characteristics relate to spline couplings, read this article. It will give you the necessary knowledge to determine which type of coupling best suits your needs. Keeping in mind that spline couplings are usually spherical in shape, they are made of steel.

Involute splines

An effective side interference condition minimizes gear misalignment. When two splines are coupled with no spline misalignment, the maximum tensile root stress shifts to the left by five mm. A linear lead variation, which results from multiple connections along the length of the spline contact, increases the effective clearance or interference by a given percentage. This type of misalignment is undesirable for coupling high-speed equipment.
Involute splines are often used in gearboxes. These splines transmit high torque, and are better able to distribute load among multiple teeth throughout the coupling circumference. The involute profile and lead errors are related to the spacing between spline teeth and keyways. For coupling applications, industry practices use splines with 25 to fifty-percent of spline teeth engaged. This load distribution is more uniform than that of conventional single-key couplings.
To determine the optimal tooth engagement for an involved spline coupling, Xiangzhen Xue and colleagues used a computer model to simulate the stress applied to the splines. The results from this study showed that a “permissible” Ruiz parameter should be used in coupling. By predicting the amount of wear and tear on a crowned spline, the researchers could accurately predict how much damage the components will sustain during the coupling process.
There are several ways to determine the optimal pressure angle for an involute spline. Involute splines are commonly measured using a pressure angle of 30 degrees. Similar to gears, involute splines are typically tested through a measurement over pins. This involves inserting specific-sized wires between gear teeth and measuring the distance between them. This method can tell whether the gear has a proper tooth profile.
The spline system shown in Figure 1 illustrates a vibration model. This simulation allows the user to understand how involute splines are used in coupling. The vibration model shows four concentrated mass blocks that represent the prime mover, the internal spline, and the load. It is important to note that the meshing deformation function represents the forces acting on these three components.
splineshaft

Stiffness of coupling

The calculation of stiffness of a spline coupling involves the measurement of its tooth engagement. In the following, we analyze the stiffness of a spline coupling with various types of teeth using two different methods. Direct inversion and blockwise inversion both reduce CPU time for stiffness calculation. However, they require evaluation submatrices. Here, we discuss the differences between these two methods.
The analytical model for spline couplings is derived in the second section. In the third section, the calculation process is explained in detail. We then validate this model against the FE method. Finally, we discuss the influence of stiffness nonlinearity on the rotor dynamics. Finally, we discuss the advantages and disadvantages of each method. We present a simple yet effective method for estimating the lateral stiffness of spline couplings.
The numerical calculation of the spline coupling is based on the semi-analytical spline load distribution model. This method involves refined contact grids and updating the compliance matrix at each iteration. Hence, it consumes significant computational time. Further, it is difficult to apply this method to the dynamic analysis of a rotor. This method has its own limitations and should be used only when the spline coupling is fully investigated.
The meshing force is the force generated by a misaligned spline coupling. It is related to the spline thickness and the transmitting torque of the rotor. The meshing force is also related to the dynamic vibration displacement. The result obtained from the meshing force analysis is given in Figures 7, 8, and 9.
The analysis presented in this paper aims to investigate the stiffness of spline couplings with a misaligned spline. Although the results of previous studies were accurate, some issues remained. For example, the misalignment of the spline may cause contact damages. The aim of this article is to investigate the problems associated with misaligned spline couplings and propose an analytical approach for estimating the contact pressure in a spline connection. We also compare our results to those obtained by pure numerical approaches.

Misalignment

To determine the centering force, the effective pressure angle must be known. Using the effective pressure angle, the centering force is calculated based on the maximum axial and radial loads and updated Dudley misalignment factors. The centering force is the maximum axial force that can be transmitted by friction. Several published misalignment factors are also included in the calculation. A new method is presented in this paper that considers the cam effect in the normal force.
In this new method, the stiffness along the spline joint can be integrated to obtain a global stiffness that is applicable to torsional vibration analysis. The stiffness of bearings can also be calculated at given levels of misalignment, allowing for accurate estimation of bearing dimensions. It is advisable to check the stiffness of bearings at all times to ensure that they are properly sized and aligned.
A misalignment in a spline coupling can result in wear or even failure. This is caused by an incorrectly aligned pitch profile. This problem is often overlooked, as the teeth are in contact throughout the involute profile. This causes the load to not be evenly distributed along the contact line. Consequently, it is important to consider the effect of misalignment on the contact force on the teeth of the spline coupling.
The centre of the male spline in Figure 2 is superposed on the female spline. The alignment meshing distances are also identical. Hence, the meshing force curves will change according to the dynamic vibration displacement. It is necessary to know the parameters of a spline coupling before implementing it. In this paper, the model for misalignment is presented for spline couplings and the related parameters.
Using a self-made spline coupling test rig, the effects of misalignment on a spline coupling are studied. In contrast to the typical spline coupling, misalignment in a spline coupling causes fretting wear at a specific position on the tooth surface. This is a leading cause of failure in these types of couplings.
splineshaft

Wear and fatigue failure

The failure of a spline coupling due to wear and fatigue is determined by the first occurrence of tooth wear and shaft misalignment. Standard design methods do not account for wear damage and assess the fatigue life with big approximations. Experimental investigations have been conducted to assess wear and fatigue damage in spline couplings. The tests were conducted on a dedicated test rig and special device connected to a standard fatigue machine. The working parameters such as torque, misalignment angle, and axial distance have been varied in order to measure fatigue damage. Over dimensioning has also been assessed.
During fatigue and wear, mechanical sliding takes place between the external and internal splines and results in catastrophic failure. The lack of literature on the wear and fatigue of spline couplings in aero-engines may be due to the lack of data on the coupling’s application. Wear and fatigue failure in splines depends on a number of factors, including the material pair, geometry, and lubrication conditions.
The analysis of spline couplings shows that over-dimensioning is common and leads to different damages in the system. Some of the major damages are wear, fretting, corrosion, and teeth fatigue. Noise problems have also been observed in industrial settings. However, it is difficult to evaluate the contact behavior of spline couplings, and numerical simulations are often hampered by the use of specific codes and the boundary element method.
The failure of a spline gear coupling was caused by fatigue, and the fracture initiated at the bottom corner radius of the keyway. The keyway and splines had been overloaded beyond their yield strength, and significant yielding was observed in the spline gear teeth. A fracture ring of non-standard alloy steel exhibited a sharp corner radius, which was a significant stress raiser.
Several components were studied to determine their life span. These components include the spline shaft, the sealing bolt, and the graphite ring. Each of these components has its own set of design parameters. However, there are similarities in the distributions of these components. Wear and fatigue failure of spline couplings can be attributed to a combination of the three factors. A failure mode is often defined as a non-linear distribution of stresses and strains.

China Professional Plastic Extruder Parts Extruder Screw Shaft   custom drive shaft	China Professional Plastic Extruder Parts Extruder Screw Shaft   custom drive shaft
editor by CX 2023-10-23

China Plastic Twin Screw Extruder Parts Involute Spline Shaft with ce certificate top quality Good price

Solution Description

      
We manufacture screw and kneading components for co-rotating twin screw extruders ranging from fifteen.6 mm to 350 mm and more than.
     Our manufacturing specializes in segmented screws for twin screw extruders and is optimized for versatile purchase handling.
Co-rotating twin screw components for 
-APV          -KOBE        -OMC
-Buhler      -KraussMaffei       -Theysohn
-Buss        -Berstorff       -Toshiba
-Clextral     -Labtech     -USEON
-Coperion      -Lantai     -others
-JSW     -Leistritz 
-Keya     -Maris 
Sorts of the CZPT Segments
* Single Keyway    * Square Keyslot     *Higher torque key button     * Twin keyslot
* Involute internal spline     * Round keyslot      *Retackle spline      * CZPT ‘s demands CZPT

We provide a broader decision of resources:
* 40CrNiMo      * WR15E       * WR30
By functioning closely with CZPT ers in selecting optional materials,we can decrease put on and tear and associated costs.

 

About CZPT Business

Joiner CZPT ry Co.,Ltd has a number of a long time expertise in the manufacture and supply of new and refurbished use areas for all significant can make of twin-screw extruders and the Industries concerned in plastics market, chemical market, powder coating, meals food market, wood plastic and so forth..
By means of shut doing work interactions with CZPT CZPT ers we have been capable to satisfy their demands. Adaptability allows us to layout and manufacture normal and bespoke elements for exclusive programs. 
Via CZPT very qualified and skilled employees we are capable to offer complex assistance and guidance. 
Our strengths are based mostly on a lot of many years expertise providing the adhering to:
* Aggressive fees per unit of production 
* CZPT turn spherical for assortment and shipping on refurbished parts 
* Areas CZPT from stock for a wide range of extruder makes 
* Extensive inspection treatment on all elements prior to dispatch 
* A time confirmed good quality service 
* Latest manufacturing tactics and metallurgy, guaranteeing steady and reputable performance of parts 
* CZPT ized solutions to satisfy specific demands.
Our Manufacturing Plant

FRQ
 
one. Q: Are you a factory or buying and selling organization? 
 —-A: A factory 
two. Q: The place is your manufacturing unit found? How can I visit there? 
—–A: Our manufacturing facility is found in HangZhou, ZheJiang  Province, CZPT , 
1) You can fly to HangZhou Airport right. We will pick you up when you get there in the airport 
All CZPT clients, from domestic or abroad, are warmly welcome to visit us! 
                                             
3.Q: What makes you different with other folks?
—-A: 1) Our Superb Service 
 For a quick, no headache quote just send e-mail to us
 We guarantee to reply with a price in 24 hours – sometimes even in the hour.
 
two) Our quick production time
For Standard orders, we will promise to make inside 30 functioning times.
As a manufacturer, we can make sure the shipping and delivery time in accordance to the formal deal.
 
 4.Q: How about the shipping and delivery time? 
—-A: This is dependent on the solution. Normally common goods are sent inside 30 days. 
 

  1.  Q: What is the expression of payment? 
    —-A: 1) T/T payment   2) LC  

 
6.Q: Might I know the status of my get?
—-A: Of course .We will ship you details and photos at distinct manufacturing stage of your buy. You will get the newest info in time. 
 

The PTO shaft transmits energy from the tractor to the PTO electrical power attachment. This permits the tractor to power a range of tractor instruments, which includes flail mowers, sawdust, rotary tillers, excavators, and more. PTO shaft connectors on tractors are not standardized, which can direct to problems when connecting the PTO shaft. For case in point, on some old tractors, the connecting flange is fairly close to the tractor alone, so the link is tough and there is a possible basic safety hazard.

China Factory High Quality Zse 110 Wr15e Twin Screw Extruder Spline Shaft for Plastic Machine with ce certificate top quality Good price

Merchandise Description

       We manufacture screw shafts for co-rotating twin screw extruders ranging from ten mm to a hundred and twenty mm and above. Our production specializes in shafts for twin screw extruders and is optimized for adaptable order dealing with.

Co-rotating twin screw shafts for 
-APV        -KOBE           -OMC
-Buhler      -KraussMaffei      -Theysohn
-Buss       -Berstorff-          -Toshiba
-Clextral     -Labtech          -USEON
-Coperion     -Lantai          – other folks
-JSW        -Leistritz    
-Keya        -Maris

Kinds of  shaft
* One Keyway                  * Square Keyslot          *High torque essential button       * Twin keyslot
* Involute interior spline         * Spherical keyslot           *Retackle spline              * CZPT ‘s specifications CZPT

We supply a broader decision of material
Substance: 
– Structural alloy metal   40CrNiMo
– PM-HIP Alloy Steel WR15E
– PM-HIP Alloy Steel WR30

Enclosed WR15E content information

Chemical composition

  C Si Mn Cr Mo V
W-% .40 1.00 .50 5.00 one.60 1.00

By functioning closely with CZPT ers in selecting optional components,we can lessen put on and tear and associated fees.

Material qualities

Our Manufacturing Plant

FRQ
 
1. Q: Are you a factory or trading company? 
 —-A: A factory
2. Q: Where is your factory located? How can I visit there? 
—–A: Our factory is located in HangZhou, ZheJiang  Province, China, 
1) You can fly to HangZhou Airport directly. We will pick you up when you arrive in the airport 
All our clients, from domestic or abroad, are warmly welcome to visit us! 
                                             
3.Q: What makes you different with others?
—-A: 1) Our Excellent Service 
 For a quick, no hassle quote just send email to us
 We promise to reply with a price within 24 hours – sometimes even within the hour.
 If you need an advice, just call our export office at   571 87226313, we will answer your questions immediately.
two) Our quick manufacturing time
For Normal orders, we will promise to produce within 30 working days.
As a manufacturer, we can ensure the delivery time according to the formal contract.
 
 4.Q: How about the delivery time? 
—-A: This depends on the product. Typically standard products are delivered within 30 days. 
 

  1.  Q: What is the term of payment? 
    —-A: 1) T/T payment   2) LC  

 
6.Q: May I know the status of my order?
—-A: Yes .We will send you information and photos at different production stage of your order. You will get the latest information in time. 
 

PTO shafts fluctuate in dimensions and you will need to have to find a matching coupling to drag. Attaching the device to the tractor must be straightforward. If you have to raise the unit off the ground to join to the driveshaft, or if the driveshaft is way too prolonged, forcing the connection could damage each. If you have an existing PTO shaft helpful, it is straightforward to confirm your length. Close it and evaluate from PTO yoke to yoke.